NAT problem
Posted: Sun Sep 18, 2016 3:36 pm
Hi guys i have a problem with the NAT in For honor it is stuck on STRICT and i can't fix it. 
Page 1 of 1
Posted: Mon Sep 19, 2016 5:02 am
I don't quite get you as I don't own the game. I'm replying only because as for me NAT stands for Network Address Translation. I'm not networking guru but I could possibly help you with that. But after reading what you wrote I'm not quite sure it's about networking at all.
Posted: Mon Sep 19, 2016 10:51 am
[QUOTE="SirTiny2, post: 38208, member: 37556"]Hi guys i have a problem with the NAT in For honor it is stuck on STRICT and i can't fix it. [/QUOTE]
What have you tried to do to fix it?
I did a search and came up with this article, without knowing if you have tried this yet I can't say whether it will be helpful.
http://www.gosunoob.com/for-honor/nat-s ... ing-setup/
[/QUOTE]What have you tried to do to fix it?
I did a search and came up with this article, without knowing if you have tried this yet I can't say whether it will be helpful.
http://www.gosunoob.com/for-honor/nat-s ... ing-setup/
Posted: Wed Sep 21, 2016 8:35 am
Hi, not sure if I can help you but I used to have this problem on both my PS4 and Xbox One. Solutions where:
PS4: I had to open the ports in the router (not sure what the right ones are for For Honor but you could loop that up).
Xbox One: After doing the port things NAT Type was still on strict. In the end there was an issue with the network hub which didn't comminucate rightly with the router. Removing the network hub and plug the network cable directly in the router immediatly solved the NAT issue. So IF you have a network hub, I'd say try remove it and see if it works.
Hope you can get it solved!
PS4: I had to open the ports in the router (not sure what the right ones are for For Honor but you could loop that up).
Xbox One: After doing the port things NAT Type was still on strict. In the end there was an issue with the network hub which didn't comminucate rightly with the router. Removing the network hub and plug the network cable directly in the router immediatly solved the NAT issue. So IF you have a network hub, I'd say try remove it and see if it works.
Hope you can get it solved!