The Cohhilition

Hello so i am hopping ther is somone her that maby know a good mixer whed a soundcard build in
its goin to be ust for a
sennheiser HD 700
sennheiser MK 4

Thanks for the help in befor hand

What exactly is your end goal with this? Most cases that I have come across is getting a nice sound/capture card and decent mixer then XLR it in from the mix. You also need to look at whether you want this pre or post amp.

First off thanks for taking time to awnser but whas quet some time agot seans i made thisk tiread So i have alrady buy one (
Yamaha MG10XU)

I am using it for my Shennhiser HD700 and my Shennhiser MK 4 mic ..

Interesting mixer, Yamaha good choice.

[QUOTE="wiggie2gone, post: 39397, member: 81012"]Interesting mixer, Yamaha good choice.[/QUOTE]

Hi agent do you happen to know a good way to inprov the Volyme on the Mic . have it on full on the mixerbord but dont whant to ust to mutchs Gain

Do you happent do know a good way to get more volyme ?

can you get me a picture of what your current setup is I might be able to help with that. Just need a picture of the mixer and where each knob is set at.

[QUOTE="wiggie2gone, post: 40307, member: 81012"]can you get me a picture of what your current setup is I might be able to help with that. Just need a picture of the mixer and where each knob is set at.[/QUOTE]

The mic is Connectet to LEVEL 1 Whed Phantom +48V ON

So LEVEL nob is on MAX and i have trayd whed GAIN halft way to max but traying now on a bit more now so GAIN amlmost at FULL

Problem whed the Gain is that is a bit like Mic boost. seams like the quality of the sound gets a bit masey :S And picing upp more background noises if GAIN gets two high

The resst of the nobs are Defult not movesd

http://data.yamaha.jp/sdb/product/image ... _12075.jpg

First of tanks for traying to help ask if you need more info

Have you adjusted the main level? bottom right red knob.

[QUOTE="wiggie2gone, post: 40317, member: 81012"]Have you adjusted the main level? bottom right red knob.[/QUOTE]

The LEVEL STEREO one is att 0. using the Monitor/Phones for Vol control

Whed Stereo and Monitro/phones on at the same time i do her myselft if a talk in the mic

Can you take a picture of your current setup? The levels on the bottom are the main things to work with for volume. So Gain should be turned about a 1/4 up and the Level should be half way on input 1. The master volume on the bottom right should also be up halfway as well. Once you you have that you can about tweaking the volume out. I would plug into a stereo out instead of the monitor out.

[QUOTE="wiggie2gone, post: 40319, member: 81012"]Can you take a picture of your current setup? The levels on the bottom are the main things to work with for volume. So Gain should be turned about a 1/4 up and the Level should be half way on input 1. The master volume on the bottom right should also be up halfway as well. Once you you have that you can about tweaking the volume out. I would plug into a stereo out instead of the monitor out.[/QUOTE]

First of thanks for all the help. seams to be batter now

How good are you on the hole Mixerbrod to PC probelm ?


First when i got the bord i got a POP ( the sound is like when you put in a sound cabel and you her the POP sound it makse static POP) sound ramdomli ( thinks its connectet to when any aplication starts a sound cannel on the PC )

Gott a new moderbord Same model as befor evreting work but after reinstaling the PC the probelm is back
It do not happen on the Laptop i have. and it works if USB 3.0 is turn of in BIOS (xHCI)

[QUOTE="wiggie2gone, post: 40319, member: 81012"]Can you take a picture of your current setup? The levels on the bottom are the main things to work with for volume. So Gain should be turned about a 1/4 up and the Level should be half way on input 1. The master volume on the bottom right should also be up halfway as well. Once you you have that you can about tweaking the volume out. I would plug into a stereo out instead of the monitor out.[/QUOTE]

First thanks for alla the help if help alot

Now i only need to fix the static POP sound that happens on applicaiton start up

[QUOTE="TitanDeXZoR, post: 40362, member: 46270"]First thanks for alla the help if help alot

Now i only need to fix the static POP sound that happens on applicaiton start up[/QUOTE]

Is that pop coming from the program or the mixer? Try hitting the mute button before starting the program up and see if that fixes the issue.

[QUOTE="wiggie2gone, post: 40375, member: 81012"]Is that pop coming from the program or the mixer? Try hitting the mute button before starting the program up and see if that fixes the issue.[/QUOTE]

ben doing som trubel shuting for 2 days and its seams to be a USB 2 TO usb 3.0 probelm and so .. the mixer is 2.0 and cabel PC motherbord is 3.0 and xHCI and after reinstaling the PC agent whed all the xHCI settings trun OFF in BIOS it seam to work so far not 100% yet thoe.

The static POP sound coms randomly and on aplicaiton start ups somtimes its a bit random two so

Have you tried going in analog? You could use a dual female XLR to 3.5mm jack to plug into your mic port on your system and use it that way instead. https://www.amazon.com/Pyle-Pro-PCBL38F ... B004HJ5JTC

[QUOTE="wiggie2gone, post: 40380, member: 81012"]Have you tried going in analog? You could use a dual female XLR to 3.5mm jack to plug into your mic port on your system and use it that way instead. https://www.amazon.com/Pyle-Pro-PCBL38F ... B004HJ5JTC[/QUOTE]

Wher whode i put in the aoudio ? how do that work ?

audio would go into your mic input on your computer from that cord.

[QUOTE="wiggie2gone, post: 40441, member: 81012"]audio would go into your mic input on your computer from that cord.[/QUOTE]

First off sorry if a seam dumb but Okej so ..

Both mic audio and headphones audio will go from the Mixerbrod through
this cable to the PC . and it put into the Purple/ Mic intake


Dont think it supports bothe in one but please chack

Her is my motherbord

https://www.asus.com/se/Motherboards/RAMPAGE_V_EXTREME/